BDS 740SPCU-1220, Руководство по установке

Страница: 5 / 12

NO SCALE
DATE
DATE
DRAWN
APPD REV
1/20/09
4/18/20
KLB
RBB
LIGHTED WINDSOCKS
INSTALLATION (Mech)
www.LightedWindsocks.com
LIGHTED WINDSOCK FRAME - Pipe Connection
Mounting Hardware
NOTES
1. The above is a guide for installing a BDS lighted windsock frame assembly. The installer must
decide whether to use a 1” or larger support pipe for the installation. Everything below the
shown pipe connect must be supplied “By Others”.
2. The wiring cable that supplies power to the windsock frame and top beacon when ordered is
not shown in this drawing. Support for the bottom support pipe is “By Others”.
3. The BDS supplied 1” (ID) threaded connection has a 1.315 nominal outside diameter.
4. Galvanized schedule 40 pipe available at any good plumbing supply house.
5. Suggest using a Antiseize lubrication or lubrication tape around piping threads prior to
assembly for corrosion prevention and easy assembly and disassembly if necessary.
Windsock frame
1” (ID) mounting
pipe connection.
Supplied by
BDS Systems.
1” coupling
supplied by
BDS Systems
1 ½ ” X 1” reducer
coupling shown.
Supplied
“By Others”
1 ½” support pipe
supplied
“By Others”
1” support pipe
supplied
“By Others”
Using a coupling
Using a reducer
939 NATHANIEL TRAIL WARWICK, PA 18974
BDS SYSTEMS INC.
B
939 NATHANIEL TRAIL WARWICK, PA 18974
BDS
SYSTEMS INC.