bdiusa.com
ZONA
8859-ZO-CO__
CONSOLE
4
Fine tuning your new BDI Media Furniture
These steps are to be followed after you have unpacked and completed the simple assembly instructions for
your console. Due to jostling in freight or perhaps an uneven floor, the doors on your cabinet may not appear
to be in perfect alignment. Making a few minor adjustments can rectify this situation. The high-quality European
hinge hardware is adjustable. Through a little adjustment, you can modify the orientation of the cabinet doors to
make sure that they are sitting perfectly on your unit.
STEP 1 - Level your unit
Levelers are integrated into each leg assembly and are accessed at the bottom of each cabinet leg. If your floor
is uneven, you may extend one or more levelers to attain a level, stable cabinet placement. Turning the leveler
clockwise will extend the leveler; turning it counter-clockwise will retract it.
STEP 2 - Adjust Door Hinges (if needed)
The doors on your console should be evenly spaced and the doors should open and close freely without rubbing
against the door frame. If the cabinet’s doors appear out of alignment, this condition can be corrected with
minor adjustment to the European hinges on each door. Because these hinges are adjustable, adjusting one
hinge element can sometimes cause the need for adjustments to other Zona. But with a few adjustments, you
can modify the orientation of the cabinet doors to make sure that they hang
perfectly within your cabinet.
Use the
Phillips Screwdriver T1
supplied to adjust the door hinges:
•
By adjusting
Screw 1
, the door will move LEFT or RIGHT within the frame.
Make minor adjustments at both top and bottom hinges for best results.
•
By adjusting
Screw 2
, the door will move UP or DOWN.
•
By adjusting
Screw 3
the entire door will move IN or OUT, opening or
closing the gap between the door frame and cabinet. (This screw rarely
needs adjustment.)
Tightening screw 1
on top hinge will open the
seam between Door C
& Door D here.
Loosening screw 1
on this hinge will close
the seam between Door C
& Door D here.
Door A
Door B
Door C
Door D
Door C
1
2
3