BDI VALERA 9729, Инструкция по сборке

Страница: 4 / 4

VALERA
9729
ASSEMBLY INSTRUCTIONS
4
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 7
Install Back Panel
Install Back Panel (Q) onto Upper Brackets (I) and Lower Brackets
(J) with Machine Screws (H) using 4mm Hex L-Wrench (B) .
Fasten the Machine Screws (H) in the middle of the Back Panel (Q)
and then fasten the outside Machine Screws (H) .
After Back Panel (Q) is installed, then tighten Upper Brackets (I) and
Lower Brackets (J).
Step 8
Install Glass Shelves
Note: Glass Shelves (R) are identical.
Install Rubber Stem Bumpers (M) into Base Assembly (P) .
Install Lower Glass Shelf (R) onto Base Assembly (P) . Slowly slide Glass Shelf (R)
into place under Lower Brackets (J) .
Install Shelf Clips (K) into Side Panels (O) at desired height and tighten with
Phillips Screwdriver (A) . Make certain set screw on Shelf Clips (K) faces down.
Install Middle Glass Shelf (R) into Shelf Clips (K) and tighten set screws on Shelf
Clips (K) with Phillips Screwdriver (A) .
Fasten the screws in the middle
of the panel and then
fasten the outside screws.
Shelf Clip (K)
Set screw faces down.
Carefully slide Glass Shelf (R)
under Lower Brackets (J) .
H
H
H
H
H
H
H
H
B
Q
A
L
K
R
R
Recommended
2-person Step
for easy
installation
H
B