E -
Cam Bolt x 4
D -
Dowel Pin x 8
C -
Cam Fastener x 4
I -
Upper Bracket x 4
J -
Lower Bracket x 4
K -
Shelf Clip x 4
F -
1/4-20 x 38mm
Machine Screw x 6
H -
M6 x 6mm
Machine Screw
Hex Drive x 8
G -
M6 x 20mm
Machine Screw
Hex Drive x 8
M -
Rubber Stem Bumper
x 6
L -
5/32 x 12mm
Machine Screw x 4
Phillips Drive
A -
Phillips Screwdriver
(Not Provided)
B -
4mm Hex L-Wrench
VALERA
Designed by Louis A. Lara
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2010 BDI
Made in Taiwan. 9729 Revision: 05-03-10
Component List
9729
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Valera is engineered for easy assembly. Carefully follow this procedure to
prevent any damage.
Placement and Maintenance
Valera is designed for indoor use on level floors. Clean glass with glass cleaner,
and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly workspace should be
a non-marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all other
concerns, please contact your BDI Retailer.
N -
Top Panel x 1
O -
Side Panels x 2
P -
Base Assembly x 1
Q -
Back Panel x 1
R -
Glass Shelves x 2
N
O
O
P
Q
R
