bdiusa.com
VALENCIA
1856
END TABLE
2
Step 3 - Install bumpers
Install the
light gray bumpers
in the upper holes of the table frame as shown.
Step 2 - Attach the 2 frames
Orient the large and small frames as shown with the curved edges facing down (on a carpet or padded
surface). With 1 hand, position a
threaded steel spacer
in the inside counterbore hole and with the other
hand thread a
flat head screw
through the outside and into the spacer. Repeat for all 3 spacers. Attach
remaining 3 screws through the other frame and into the other end of the spacers. Tighten all 6 screws using
both
hex wrenchs
.
H2 x 3
H2
H1 x 6
H3
Light Gray
bumper x 4
C1
C2
T1
H1
H1
