4 | BDIUSA.COM
SOMA 1133
Place the
Lift Column (C2)
on the
Top Panel (C1)
and ensure it is in the correct orientation to
allow the handset to reach the threaded holes.
Mount the
Lift Column (C2)
with
4 Screws (H1)
.
Tighten with
Hex Wrench (T1)
. Mount the Lever
with
2 Screws (H3)
. Tighten with
Phillips Screwdriver
.
Do NOT remove the tape on Lever.
HEX WRENCH – T1
QTY
1
SCREW – H1
QTY
4
SCREW – H3
QTY
2
STEP 1.
DETACH SHELF & BASE FROM TOP
STEP 2.
ATTACH LIFT COLUMN
ASSEMBLY
ASSEMBLY
Do not remove tape on lever until
assembly is complete.
CAUTION
Pressing the lever will
release and extend the
column. This should only be
done once the base is fully
installed. Do not lean or
stand over the column
during assembly to avoid
risk of injury.
H1
H1
C2
H3
C1
Place the
Top Panel (C1)
upside down on a
soft, flat surface. Remove the 3 Silver Screws
connecting the
Bottom Plate (C4)
with a
Hex Wrench (T1)
. Discard these screws.
Remove the
4 Screws (H2)
connecting the
Shelf
(C3)
to the
Top Panel (C1)
with a
Phillips Screwdriver
. Set these screws aside
for later use.
HEX WRENCH – T1
QTY
1
PHILLIPS SCREWDRIVER
NOT INCLUDED
QTY
1
C1
C4
H2
H2
C3
