2
assembly
instructions
bdiusa
.
com
customerservice
@
bdiusa
.
com
I x 3
G x 4
H x 2
K
Step 3
Install Handles.
Carefully turn pedestal upright so that it rests evenly on all
installed casters, then install one
Drawer Pull (H)
per drawer
using the
5/32” x 22mm Phillips Screw(G)
and a Phillips
Screwdriver.
Step 4
Install Glass Top
Carefully place
Glass Top (J)
on pedestal’s top surface,
aligning the pre-installed pucks over the corresponding
mounting point on the pedestal. Attach
Glass Top (J)
by
opening drawer and fastening from underside (inside
drawer) using three (3)
1/4”-20 x 15mm Screws (I)
with
provided
Allen Wrench (A)
.
NOTE: Glass Top (J) fastens at three (3) points only---two
(2) near front edge and one (1) at center. Pucks near rear
edge do not accept screws and merely rest in place.
DO NOT OVER-TIGHTEN.
Step 5
File Folders
Users who wish to use legal-length files may install provided
Legal File Folder Stretchers (K)
by dropping into place near
front and back of file drawers.
