BDI Novia 8424, Инструкция по сборке

Страница: 2 / 4

2
assembly instructions
bdiusa
.
com customerservice
@
bdiusa
.
com
3
Step 4
Fasten Base Frame to Assembled Cabinet
NOTE: Don’t over tighten the bolts until they
are all in place! Once in place, tighten all bolts.
Using two (2) 1/4-20 x 4” Bolts (K) and the
4mm Hex Driver (B)
, fasten the leg sections
of the assembled base frame to the bottom of
the
Assembled Cabinet (J)
.
Using six (6) 1/4-20 x 1.5” Bolts (M) and
the 4mm Hex Driver (B) , fasten the side
stretchers of the assembled base frame to
the bottom of the
Assembled Cabinet (J) .
Using two (2) 1/4-20 x 4” Bolts (K) and the
4mm Hex Driver (B) , install the Center Leg
(N)
to the bottom of the
Assembled Cabinet
(J)
.
Place Center Leg so that the leveler is
towards the back of the cabinet.
Step 3
Attaching Base Frame to Assembled Cabinet
Install the four (4) Large Wood Dowels (I) into the four corners holes
of the Assembled Cabinet (J) and tap in place. Then carefully lower the
assembled base frame over the Assembled Cabinet (J) , aligning Large
Wood Dowels (I) into the corresponding base frame holes.