1
Your Novia® Home Theater Furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Placement and Maintenance
Novia® Home Theater Furniture is designed for indoor use on level
floors. Clean glass with glass cleaner, and steel parts and wood veneer
with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Step 2
Build Base Assembly
First, remove all internal components from the cabinet including shelves,
hardware box and legs.
Install
Cam Screws (E)
into
Leg Sections (D)
and hand tighten. Insert
Small Wood Dowels (F)
into legs on either side of the
Cam Screws (E)
as
shown in drawing.
Locate the
Cam Lock Nuts (H
) in the
Side Stretchers (G).
Loosen the
head of the
Cam Lock Nuts (H)
using the provided
Phillips Screwdriver
(A).
Place
Stretchers
so
Cams
are facing towards the wheels and the
grooved edge detail faces outward.
Component List
Designed by Matthew Weatherly
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
“Novia” and BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2009, BDI
Made in China. 8424REV120709v3
Novia
®
8 4 2 4
a s s e m b l y
i n s t r u c t i o n s
bdiusa
.
com
customerservice
@
bdiusa
.
com
A -
Phillips Screwdriver x 1
B -
4mm Hex Driver x 1
F -
Small Wood Dowels x 8
I -
Large Wood Dowels x 4
J -
Assembled Cabinet x 1
K -
1/4-20 x 4” Bolts x 4
M -
1/4-20 x 1.5” Bolts x 6
N -
Center Leg x 1
G -
Side Stretchers
x 2
H -
Cam Lock Nuts x 4
(pre-installed)
D -
Leg Sections x 2
E -
Cam Screws x 4
C -
Leveler Wrench x 1
O -
Top Glass x 1
P -
M4 x 25mm Pull Bolts x 2
Q -
Pull x 2
R -
Adjustable Shelf x 2
S -
Back Panel x 1
Attach
Legs
to
Stretchers
from both ends.
Tighten
Cam Lock Nuts (H
) using
Phillips Screwdriver (A).
