BDI format Скачать руководство пользователя страница 4

Страница: 4 / 5

a s s e m b l y i n s t r u c t i o n s

bdi

usa.com [email protected]

format

6301

DESK

Step 6 (optional)

Attach Magnets to AC power strip (power strip not included)

Cleaning of power strip surface with rubbing alcohol will ensure best adhesive

bond. **UNPLUG POWER STRIP FROM POWER SOURCE BEFORE CLEANING**

Remove

Adhesive Foam/Magnets (J)

from the

Upper Horizontal Beam (F). Peel film

from side of the

Adhesive Foam/Magnets (J) and attach to clean, dry back side of AC

power strip.

Attach AC power strip to inside of

Upper Horizontal Beam (F)

as shown

in illustration below.

Use the slot holes provided in

Upper Horizontal Beam (F) to run all

wires to and from the desk. Keep all wires behind folded metal lip—
failure to do so will prevent

Back Panel (O)

and/or

Front Kick Panel (N)

from closing properly.

* AC Power Strip Not Included

Содержание format

Страница 2: ...merservice bdiusa com format 6301 DESK Step 2 Install Glides C to the bottom of Left Leg D and Right Leg E Step 3 Attach Upper Horizontal Beam F and Lower Horizontal Beam G to inside of Right Leg E using Screw H and 4mm Hex Wrench B C x 4 E F G E D H x 2 H x 2 ...

Страница 3: ...ontal Beam F and Lower Horizontal Beam G using Screw H and 4mm Hex Wrench B Step 5 With the help of another person gently lower Leg Assembly onto Drawer Assembly I Fasten into place using Screw H and 4mm Hex Wrench B at all 6 fastener locations DO NOT OVERTIGHTEN After fastening carefully flip desk onto legs D 2 Person Task G F H x 2 H x 2 H x 6 ...