BDI COSMO 5729, Инструкция по эксплуатации

Страница: 9 / 16

BDIUSA.COM | 9 NEED ASSISTANCE? customerservice@bdiusa.com
ADJUST DOOR HINGES—IF NEEDED FINE TUNING
These steps are to be followed after you have unpacked and completed the simple assembly
instructions for your Cosmo Console. Due to jostling in freight or perhaps an uneven floor, the
doors on your Cosmo console may not appear to be in perfect alignment. Making a few minor
adjustments can rectify this situation. Be aware that depending on your situation, patience and a
bit of trial and error are required. The high-quality European hinge hardware is infinitely adjustable,
but changing one element can cause the need for further adjustments. Through a little adjustment,
you can modify the orientation of the cabinet doors to make sure that they are sitting perfectly.
CORRECT!
Door is sitting
squarely and
evenly spaced on
tops and sides.
INCORRECT!
Door is out of
alignment with the
rest of the unit.
The doors on your cabinet should be evenly
spaced and the doors should open and close
freely without rubbing against the door frame.
If the cabinet’s doors appear out of alignment,
this condition can be corrected with minor
adjustment to the European hinges on each door.
Because these hinges are infinitely adjustable, adjusting
one hinge element can sometimes cause the need
for adjustments to other elements. But with a few
adjustments, you can modify the orientation of the
cabinet doors to make sure that they hang perfectly
within your cabinet.
Use a Phillips Screwdriver to adjust Cosmo’s door
hinges:
n
By adjusting Screw 1 , the door will move LEFT or
RIGHT within the frame. Make minor adjustments at
both top and bottom hinges for best results.
n
By adjusting Screw 2 the entire door will move IN or
OUT, opening or closing the gap between the door
frame and cabinet. (This screw rarely needs
adjustment.)
PART/DESCRIPTION QTY
NOT INCLUDED
Phillips Screwdriver
1
1
1
2
2