Place Against Inside of Edge of Frame Bracket
Align with Border Between Black Panel and Solid Wood Edge
Outside Edge of Drawer Block
Align Front Edge of Drawer Block with Arrow
The 6159 and 6459-2 Drawer Box may be installed on a Sequel 20 6151/6152 or Centro 6451-2/6452-2
Lift Desk using the provided 6159/6459-2 instruction booklet and machine screws.
If you are installing the 6159 or 6459-2 Drawer Box on a Sequel 6051/6052 or Centro 6451/6452
Lift Desk please follow these instructions:
1. Put the desk in its lowest position and, with the help of another person, safely place the desk
in an upside down position. Place on a soft, non marring surface such as carpet with the front
edge facing you.
2. Line up the outside edge of the template against the inside edge of the black frame bracket.
3. Line up the front edge of the template along the border between the black panel and the
solid wood edge at the front of the desk.
4. Repeat for the other side of the template.
5. Place drawer between the templates such that the front of the
(C11L)
and
(C11R) Mounting
Blocks
line up with the arrows printed on the templates.
6. Using a #2 Phillips head screwdriver, or a power drill with a #2 Phillips bit installed, carefully
attach the
(A2) Drawer Body
to the desk by inserting the provided
(H11) Wood Screws
and
(H12) Washers
through the holes on the
(C11L)
and
(C11R) Mounting Blocks
. If using a power
drill with a clutch setting, it is recommended to set the clutch to no more than 9 lbs.
7. You may now return your desk to its upright position.
LEFT
TEMPLATE
RIGHT
TEMPLATE
RIGHT TEMPLATE
DRAWER 6159/6459-2
A2
H11
H12
H11
H12
C11L
C11R
