8
Press F4 once: Input Mode Selection
Pushing the up arrow/down allows you to select the input channel to be changed:
Pushing the left/right arrow buttons allows selection of the following input modes:
OFF
Stereo - Factory Default
LR Swap - L/R Channels Swapped
Mono L - L input fed to both L & R outputs
Mono R - R input fed to both L & R outputs
L + R - L & R inputs are summed and fed to both L & R outputs.
The input mode is automatically saved when selected. To exit this menu
press the F1 key to return to the main menu.
Press F4 twice: Input Invert Control – Phase Inversion
Pushing the up arrow/down allows you to select the input channel to be changed:
Pushing the left/right arrow buttons allows selection of the following input modes:
Normal
Invert Left
Invert Right
Note: Phase inversion is Left or right but not both simultaneously.
Input Invert Control modes are automatically saved when selected. To exit this menu
press the F1 key to return to the main menu.
Press F4 three times to enter Input Gain Control menu
Pushing the up arrow/down allows you to select the input channel to be changed:
Pushing the left/right arrow buttons allows you to adjust gain in one dB incr/-
10 dB
Press F4 four times and the display will indicate Output Gain Control
Pushing the up arrow/down allows you to select the output channel to be changed:
Pushing the left/right arrow buttons allows you to adjust gain in one dB incr/-
10 dB
Factory default for input and output gain controls is 0 dB. When factory default gains are
used AES3 I/O is unity. When AES3 inputs are output to an analog channel the analog
output will correspond to –10 dB below full scale AES3 input when AES3 input is
nominal – 10 dB below full scale.
