bdiusa.com
AREANA
9970
CABINET MOUNT
4
Step 4
Attach
spine C
onto the 4 posts of the
cabinet mount brackets M
then fasten securely into place using four
(4)
5/16 x 5/8 in screws B
and provided
allen wrench A.
Note:
If you are using the
mount riser
, tilt the
spine C
forward and hang the
spine
on the 2 upper posts. The
posts will enter the slots on the front of the
spine C
. Lift
spine C
slightly and start threading the upper
screws
B
into the
upper posts
then swing the bottom of
spine C
onto the 2
lower posts
and thread
screws B
.
Tighten all 4
screws B
with provided
allen wrench A
.
B x 4
C
B
B
B
B
1. start upper screws
2. start lower screws
3. tighten all 4 screws
lower posts
tilt column
forward 5
degrees to
start upper
screws
upper
posts
lower
posts
M