S3740 Hardware Installation Manual
- 1 -
Chapter 1 S3740 Introduction
The section describes the characteristics and parameters of S3740 and gives an
overview of S3740.
1.1 Appearance Description for Standard Configuration
The built-in ports of S3740 are: 32 gigabit Ethernet RJ45 ports, 8 10G Ethernet SFP+
ports and 1 Console port. See table 1-1.
Table 1-1 Attributes of the built-in port
Port
Attribute
Gigabit Ethernet TX port
10/100/1000M
auto-adaptation,
MDI/MDIX
auto-identification, UTP (RJ45) TX ports, LINK/ACT
indicators
10G Ethernet optical port
SFP+ interface, 10G optical module, LINK/ACT indicator
Console port
A rate of 9600bps, mini USB interface
Figure 1-1 Front template of the S3740 switch
Table 1-2 Parts at the front template of the S3740 switch
No.
Abbrev.
Name
Description
1
1-32
32 1000Base-T ports
Forwards the 10/100M/1000M Ethernet
electrical signals.
2
TE1-TE8
8 10G SFP+ ports
Forwards the 10000M Ethernet optical
signals.
3
CONSOLE
Console port
Manages the switch locally.
4
SYS
System indicator
If the indicator is always on, the system
is normally started up.
If the indicator flickers, the system
