Bdcom S2528-B, Руководство по установке оборудования

Страница: 13 / 21

S2528-B Hardware Installation Manual
- 10 -
Figure 3- 3 RJ-45 connector of the console port
Figure 3-4: Connecting the console port of S2528-B with the computer
No. Name Remarks
1 CD No connect
2 RXD Input
3 DSR No connect
4 TXD Output
5 RTS No connect
6 CTS No connect
7 DTR No connect
8 SG GND
Table 3-1 Definition of the pins of the Console port
Note: The console port of the S2528-B switch does not support traffic control. Therefore, you
must set the option data traffic control to none when you configure the switch with the super
terminal. Otherwise, the single-pass problem will arise on the super terminal.
The cable is used to connect the console port of the S2528-B switch and the outside console
terminal device. One end of the console port is RJ45 8-core plug and the other end of the
console port is a 25-hole plug and a 9-hole plug. The RJ45 plug is put into the socket of the
console port on the S2528-B switch. DB25 and DB9 is alternative. RJ45 connects to DB9 in
the console port shown as below.