BDCOM S2510-C Hardware Installation Manual
- 14 -
Chapter 4 Maintaining Switch
Caution:
1)
Before opening the machine box, make sure that you have released the static
you carried and then turn off the power on-off of the switch. Before operating
any step in Appendix B, read the section “
Safety Advice
”.
2)
Before performing operations beside the power supply or on the machine box,
turn off the power on-off and plug out the power cable.
4.1 Opening the Machine Box
This section describes how to open the cover of the switch, required tools and
operation methods.
Caution:
When the power cable still connects the power supply, do not touch it.
When you open the cover the switch, you may use the following tools:
Crossed screwdriver
Static armguard
Perform the following steps to open the cover of the switch:
(1)
Turn off the power on-off of the switch.
(2)
Plug out all cables connected the back of the switch.
(3)
Take out the bolt from the machine box with the screwdriver.
Note:
The machine box comprises of two parts: cover and bottom.
(4)
Open the cover by holding two sides of the cover towards the direction of the
arrow key shown in the following figure:
Содержание S2510-C
Страница 1: ...BDCOM S2510 C Hardware Installation Manual...