background image

23

Barranca Diamond warrants to the original retail purchaser for a period of 90 days except as noted, from the 

date of purchase all products covered by this Warranty to be free of defects in materials and workmanship.

This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had 

been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives. 

This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused 

by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its 

individual components is altered or modified by the purchaser or if the product is used in a manner or with a 

blade not recommended by the manufacturer.

Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period 

specified above, and shall include proof of purchase. During said warranty period Barranca Diamond shall, 

at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are 

found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to 

pay for freight or other transportation related costs or expenses in connection with any defective products or 

components that are either returned to Barranca Diamond’s facility or any authorized repair station and/or any 

replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty.

Parts and labor needed to maintain products and the replacement of components due to normal wear and tear 

are the purchaser’s responsibility and are not covered by this Warranty. All products or components replaced 

under warranty become the property of the manufacturer. All replacement parts will be considered to be part of 

the original product and any warranty on such parts will expire coincidentally with the original Warranty. Barran-

ca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Diamond 

or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a charge 

for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith.

IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF 

ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND SHALL NOT BE LI-

ABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS 

NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.

The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or 

warranties applicable to the products it covers. All other warranties, including, without limitation, the implied 

warranty of merchantability and/or fitness for a particular purpose or use being denied. This limited warranty is 

expressly in lieu of all other warranties, whether expressed or implied.

Barranca DiamonD LimiteD Warranty

Please complete the warranty registration card and return. Any problems encountered should be directed to 

Barranca Diamond Customer Service department at (800) 630-7682 M-F 8am - 5pm PST.

NOTE THIS INFORMATION FOR FUTURE USE:

MODEL NUMBER:
SERIAL NUMBER:
PURCHASE PLACE:

PURCHASE DATE:

BD-125WP  

 

 

 

 

 

                     LIMITED WARRANTY

Содержание BD-125WP





























Отзывы: