BCS TIP5200IR, Быстрый старт

Страница: 10 / 17

6
2 Device Installation
2.1 Installation
Please follow the steps listed below to install the device. Please refer to Figure 2-1 for reference.
Step 1. On installation surface, mark hole for bracket installation and insert three expansion bolts
on installation surface. Push the three expansion bolts into the installation holes and fasten
them.
Step 2. Aim the three screw holes on bracket bottom at three installation holes on installation
surface. Insert the three set screws into the three screw holes on bracket bottom one by one.
Fix bracket on installation surface.
Figure 2-1 Device installation illustration
2.2 Adjust Lens and Install SD Card
Rotate lens cover counterclockwise and remove it to view lens, SD card, buttons and reset.
Note:

If you cannot rotate lens cover, you can take down sunshade first and try again.

Lens cover is part of device waterproof system, please fasten it when you finish adjustment.

Motorized focus series device has motorized focus lens, no need of manual adjustment by
default, meantime support five adjustment buttons. Manual focus series device has manual
focus lens which shall be adjusted according to actual need. See Figure 2-2.