background image

BCS 770HY Two Wheel Tractor Power Unit

TWT770HY/PU/0221

 

Page 5

Read the user manual carefully before 

starting  up  the  engine.  The  following 

warnings are important for the safety 

of  the  operator  and  any  onlookers  or 

pets.
Caution  and  common  sense  are  the 

main factors in accident prevention.

Do  not  use  the  machine  on  slopes 

exceeding 30

o

 (58% of inclination).

Warning!

 The machine should only be 

used for the purpose for which it was 

designed. Do not transport persons. 

Do 

not

 make changes to it or tamper with 

it. 

Do not

 race with it at all or use it as 

a trailer, etc.
Pay particular attention to the warnings 

and safety stickers on the machine.

Caution! Danger!

 The battery contains 

sulphuric acid. Fatal if ingested! It can 

cause  blindness  if  it  gets  into  contact 

with eyes. It can also burn the skin and 

dissolve clothing. 

Danger! 

Keep  the  battery  away  from 

sparks,  matches,  lighted  cigarettes 

and  naked  flames.  The  battery  gas  is 

extremely  dangerous  and  lethal.  Can 

explode. 

Caution! Danger!

 An exploded tyre can 

cause serious injuries or death.

Danger!

  The  fuel  is  highly  flammable. 

Do  not  refuel  when  the  engine  is  on. 

Turn  off  the  engine.  Let  the  muffler 

cool down. Do not refuel while smoking 

or  in  the  vicinity  of  naked  flames  or 

sparks. Handle and store the fuel with 

care.

Danger! 

Never  touch  moving  pulleys 

and belts. Can cause serious accidents 

to people.

Danger! 

Do not carry out maintenance 

with the engine on. Turn off the engine 

and remove the key.
Following  the  initial  start-up,  it  is 

recommended  that  you  familiarize 

yourself  with  the  controls  and  the 

machine.
Prior to starting work, learn how to turn 

off the machine safely and quickly.

Danger! 

The  movement  of  blade  and 

fork is verv dangerous. Never put your 

hands and/or feet near the blade and 

forks.
Before  letting  other  people  use  your 

machine, you must inform them about 

the safety standards. Make them read 

the user manual and teach them how 

to use the machine.
Before  turning  on  the  machine,  check 

that there is nobody in the vicinity, 

especially children.

Before reversing the machine, check for 

people or obstacles.

Safety

Содержание PowerSafe 770HY





























Отзывы: