10
|
CLEANING
•
Make sure the fire pit is completely cool before cleaning or storage.
•
Use a soft brush or cloth to wipe stains and dirt.
•
If necessary, clean with mild detergent and a soft cloth/sponge.
•
Thoroughly dry the fire pit after cleaning.
•
Do not submerge control panel or burner assembly in water.
•
Do not use petroleum-based or abrasive cleaners as it may damage the finish.
•
Do not use rough or harsh sponges/brushes.
EXTINGUISHING
1.
Turn the control knob to the off position.
2.
Close off the gas supply to ensure there are no leaks.
3.
Allow this item to cool before handling, cleaning, or storage.
LIGHTING
1.
Check that the control knob is in the "OFF" position.
2.
Connect a propane cylinder and open the gas supply line.
3.
Push down and hold the control knob while turning it counterclockwise to the "LOW" position (you
should hear a clicking sound), this will light the burner. If this does work, repeat this process.
4.
If the burner has not lit after a second attempt, shut off the gas, wait 5 minutes, and repeat step 3.
5.
If the burner does not light, use a long match or long butane lighter.
6.
Adjust flame to desired level with the control knob.
INSTALLING BATTERY
1.
Unscrew igniter button.
2.
Insert two AA battery with the positive side facing outwards.
3.
Replace igniter button.
NOTE:
If the burner is not lighting, you may need to replace the battery in the igniter.
