REMOTE DIAGRAM
360° ADJUSTABLE BAR
•
ON/OFF:
Press to turn the product on or off.
Starts at 15 minutes.
•
AUTO:
Press to cycle between preset programs,
“M1, M2, M3, MANUAL.”
•
TIME:
Press to adjust massage time from 5
minutes to 30 minutes.
NOTE:
Do not run the massager longer than 30
minutes at a time. Doing so may result in
malfunction and possible injury.
•
HEATING:
Press to turn the heating function
on/off.
•
SPEED:
Press to cycle between three speeds:
“high, medium, and low.”
•
DIRECTION:
Press to alter the rotation of the
rollers: clockwise & counterclockwise.
•
This bar doubles as an adjustable support and carrying handle.
•
Rotate the bar to adjust the angle of the machine and improve your massage experience.
•
Make sure the bar is properly locked before use.
HOW TO ADJUST THE BAR
1.
Press and hold the round buttons on both sides of the machine, then adjust bar angle until it reaches
the desired position.
2.
Release to lock the bar in position.
NOTE:
Make sure the lock is secure when lifting this product.
MASSAGE FUNCTION
1.
Plug in the massager and the display will illuminate. Press the “On/Off” button.
NOTE:
When using the manual input, make sure the control panel is facing you; this will prevent harm
to your feet and ankles.
2.
Press the “Auto” button to browse the preset levels of pressure and intensity.
NOTE:
This device starts on “M1”
3.
Press the “Time” button to adjust the length of your massage. This massager starts on 15 minutes and
increases in 5-minute intervals up to a maximum 30 minutes.
4.
Press the “Direction” button to adjust the rotation of the massagers.
5.
Press the “Speed” button to increase or decrease the frequency of pressure in the rollers.
6.
Press the “Heating” button to turn the heat function on/off.
7.
Once settings are inputted, gently insert your feet, and enjoy.
ON/OFF
Time
Auto
Speed
Heating
Direction
|
5
