
PRODUCT ASSEMBLY
1
Attach two part 5 table supports to one part 4 support connector with four part A screws, then
cover with four part F end caps.
Repeat to assemble the second table support.
2
Attach two part 2 table sides to two part 3 table frames with
eight part D screws, then cover with eight part F end caps.
Attach one support beam assembly to two part 2 table sides
with four part A screws, then cover the bottom screws with
two part F end caps.
Repeat to attach the second support beam assembly.
Connect the two part 4 support connectors with one part B screw and one part E nut, then
cover with one part F end cap.
|
5
5
x2
4
A
x4
F
x4
D
x8
A
x8
E
B
F
x13
3
x2
2
x2
Part F endcap are only
included in SKY5857.