SETTING UP THE APPLIANCE
1.
Remove all packaging. Inspect appliance to make sure it is in good condition.
2.
Place on a stable, heat-resistant surface.
3.
Arrange appliance so it is at least 12 inches away from other kitchen appliances.
BEFORE FIRST USE
1.
Fill kettle to max capacity.
2.
Press
Start
to boil water.
3.
Pour out water and rinse kettle.
4.
Repeat to thoroughly clean kettle.
OPERATING INSTRUCTIONS
1.
Fill kettle with desired amount of water. Close the lid.
-
Water level must be between 0.5 and 1.7 liters.
2.
Place kettle on base and plug base into a wall outlet. Press
Start
to turn on.
3.
Press
Start
again to boil water.
-
To heat to a certain temperature, set desired temperature and press Start to heat.
-
Kettle will turn off automatically when water reaches desired temperature.
KEEP WARM FUNCTION
USAGE TIPS
Use the keep warm function to maintain or set water temperature.
1.
Press
Keep Warm
button and set temperature.
2.
Press
Start
to begin keep warm function.
3.
To turn off, press
Keep Warm
button again or press
Cancel.
-
Keep warm function automatically turns off after 2 hours.
•
Do not operate without water in kettle.
•
Do not fill kettle beyond max capacity.
•
Be careful of scalding; do not open lid while appliance is operating.
•
Kettle turns off automatically after reaching desired temperature.
•
After boiling water, let kettle cool before turning on again.
•
Overheating protection will activate if kettle is switched on without water. Let kettle cool for 15 minutes
before restarting.
|
5