Pg. 10
CLEANING THE ROLLING BRUSH
1)
Compress the plastic tabs to remove the bracket.
2)
Remove the rolling brush by carefully pulling it from the
left side.
3)
Use the hook on the brush tool to remove hair from the
rolling brush.
4)
If necessary, rinse the rolling brush with water. Make
sure it is completely dry before reinstallation.
SETTING CLEANING SCHEDULE
1)
While in standby, press the
TIMER
button and then press the
SPOT
button.
2)
Press the
LEFT/RIGHT
buttons to toggle through the days of the week (1 represents Monday and 7
represents Sunday).
3)
Hold the
UP
button to select a day. Hold the
DOWN
button to cancel a selected day.
4)
Press
START/STOP
to save and continue to setting the time.
5)
Press the
LEFT/RIGHT
buttons to switch between hour and minute.
6)
Press the
UP/DOWN
buttons to increase/decrease the hour or minute.
7)
Press
START/STOP
to save the settings.
SETTING WATER SEEPING SPEED
1)
While in standby, press the
TIMER
button and then press the
WALL
button. The seeping speed
indicator light will flash.
2)
Press the
UP
button to set normal water seeping speed, which is suitable for hardwood floors or
relatively clean floors. The indicator light will go solid and the screen will display “1111.”
3)
Press the
DOWN
button to set fast water seeping speed, which is suitable for tile/marble floors or
very dirty floors. This indicator light will turn off and the screen will display “0000.”
4)
Press the
START/STOP
button to save the settings.
