BCP SKY1643 Скачать руководство пользователя страница 3

Pg. 3

Please retain these instructions for future reference.

NOTICE

The following safety hazards may result in serious injury or death:

• 

Please read through all instructions before mounting and using this fireplace. 

• 

This fireplace is not intended for commercial use.

• 

This product should be wall-mounted at least 2 ft. above the ground. 

• 

There should be at least 3.5 ft. clearance between this product and the ceiling.

• 

The wall bracket on this product should only be fit per manual instructions.

• 

Do not install this unit onto a carpeted surface or onto any surface that could disrupt airflow to and 

from vents.

• 

Only use this heater with an AC power supply with the correct voltage.

• 

Cord should only be routed to the bottom right of the fireplace.

• 

Unplug fireplace when not in use. Turn off fireplace before unplugging unit.

• 

Do not plug in other devices into the same circuit.

• 

Do not turn the appliance on until it is properly installed.

• 

Do not leave appliance unattended during use or when plugged in.

• 

Do not let children operate or go near this appliance.

• 

Do not let children or small pets near during mounting and installation.

• 

Do not operate this product if the cord or any parts of this appliance are damaged. Do not attempt 

to modify the cord.

• 

Periodically check the cord and appliance for damage.

• 

Do not run cord under rugs, furniture, etc.

• 

Do not allow cord to hang over sharp edges or place near hot surfaces.

• 

Do not cover or obstruct the heater in any way.

• 

Do not store flammable liquids near this heater.

• 

Do not touch this heater when it is in use.

• 

Never immerse this appliance or cord in water or any other liquids.

• 

Do not expose this heater to water or humidity.

• 

Repairs to this appliance should only be performed by a licensed and qualified electrician. 

• 

Disconnect and discontinue use of this appliance if any water damage occurs, or if the unit becomes 

hot to the touch, broken, or smokes/smells like smoke.

• 

Do not dispose of this appliance as unsorted waste. Use special collection facilities for electrical 

appliances.

NOTE: When the heat function is turned on for the first time, a slight odor may be present. This is 

normal and should not occur again

.

SPECIFICATIONS

Power Supply

Rated Power

110-120 V

1500 W

Lighting

(3) 40W G9 Bulbs

Содержание SKY1643













Отзывы: