28
Enabled
Activates automatically when the system boots up causing a
warning message to appear when anything attempts to access the
boot sector of hard disk partition table.
CPU L1 & L2 Cache
The default value is Enabled. This option enables the Level 1 cache memory.
Enabled
(default)
Enable cache
Disabled
Disable cache
Note: The internal cache is built in the processor. Celeron 600 L2 cache is 0K
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the computer. If
this is set to Enabled, BIOS will shorten or skip some check items during POST.
Enabled
(default)
Enable quick POST
Disabled
Normal POST
USB Flash Disk Type
Selects the type of emulation for the USB flash disk. The settings are Auto, Floppy, HDD.
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected
in these items. The settings are Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD,
USB-ZIP, USB-CDROM, LAN and Disabled.
Boot Other Device
Try to automatically detect any available bootable devices not Enabled in the Boot
Device Menu.
Swap Floppy Drive
If the system has two floppy drives, choose Enable to assign physical drive B to logical
drive A and vice-versa.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks.
360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Boot Up NumLock Status
The default value is On.
On
(default)
Keypad is numeric keys.
Off
Keypad is arrow keys.
