2
WARNING: Electrostatic Sensitive Device (ESD)
Static electricity can easily damage your motherboard and will void your motherboard warranty. Keep the motherboard
and other system components in their anti-static packaging until you are ready to install them. Touch a grounded surface
before you remove any system component from its protective anti-static packaging. Unpacking and installation should be
done on a grounded, anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same
points as the anti-static mat. During configuration and installation touch a grounded surface frequently to discharge any
static electrical charge that may have built up in your body. Avoid touching the components when handling the
motherboard or a peripheral card. Handle the motherboard and peripheral cards either by the edges or by the peripheral
card case-mounting bracket.
WARNING: Misplaced Jumper Damage
Incorrect jumpers and connectors settings may lead to damage to your motherboard and will void your motherboard
warranty. Please pay special attention to not connect these headers in the wrong direction. DO NOT change ANY jumpers
while the motherboard has power.
Jumpers
Label
Function
PCIE_JP1
Mini PCIE Rev1.1 & 1.2 Mode Selection
COMS1
Clear CMOS Selection
JP2
Backlight Enable Selection
JP3
Backlight Power Selection
JP5 Power
Mode
Selection
JP6
COM3 Signal / Power Selection
JP7
COM1 Signal / Power Selection
JP8
COM2 Signal / Power Selection
JP9
COM6 Signal / Power Selection
JP10
COM4 Signal / Power Selection
JP11
COM5 Signal / Power Selection
