BCM FR550, Руководство пользователя

Страница: 39 / 47

FR550
4-13
4.6.4 Video Off After
As the system moves from lesser to greater power-saving modes, select the mode in which
you want the monitor to blank.
4.6.5 Doze Mode
Defines the continuous idle time before the system entering DOZE mode. The range is from 1
min to 1 Hr. If any item defined is enabled & active, STANDBY timer will be reloaded
4.6.6 Standby Mode
After the selected period of system inactivity (1 minute to 1 hour), the fixed disk drive and the
video shut off while all other devices still operate at full speed.
4.6.7 Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour), all devices except the CPU
shut off.
4.6.8 HDD Power Down
After the selected period of drive inactivity (1 to 15 minutes), the hard disk drive powers
down while all other devices remain active.
4.6.9 VGA Active Monitor
When Enabled, any video activity restarts the global timer for Standby mode.
4.6.10 Soft-Off by PWR-BTTN
When this feature set to “Delay 4 sec.” , the system will become suspend once the Power
Switch be pressed within 4 second, and the system will Power Off once the Power Switch be
pressed over 4 second. If It set to “Instant Off”, the system will unconditional Power Off once
the Power Switch be pressed.
4.6.11 Resume by Ring
The system will be awaked by telephone ring if this feature set to Enable
4.6.12 IRQ8 Clock Event
You can turn On or Off monitoring of IRQ8 (the Real Time Clock) so it does not awaken the
system from Suspend mode.
4.6.13 Reload global Timer Evets
When Enabled, an event occurring on each device listed below restarts the global time for
Standby mode.