![background image](http://html1.mh-extra.com/html/bci/one-door-urban-bus-2019/one-door-urban-bus-2019_owners-manual_2714238036.webp)
April 2019
– Issue 4
Page
36
of
48
Section 6 - Vehicle Maintenance (continued)
6B
OTHER CHECKS (CONT’D)
A
B
C
D
BOXES NOT FILLED IN WITH BLACK ARE TO BE ACTIONED
IF
THEY LINE-UP WITH THE RELEVANT SERVICE COLUMN A,B,C,D
EVERY
15000KM
EVERY
30000KM
EVERY
60000KM
EVERY
120000KM
No
TICK REQUIRED SERVICE DUE IN BOX OPPOSITE
36 Check and adjust wheel alignment
37 Check condition and function of shock absorbers
38 Check operation of all seat belts and seats are correctly secured
39 Check fire extinguishers levels and expiry date
40 Check operation of all lights and gauges
41 Check all warning lights are functioning correctly
42 Check emergency exit lights and stickers for wear and damage
43 Check operation of air conditioner
44 Replace air conditioner cabin filter
45 Replace AdBlue filter
46 Replace AdBlue tank filter (bottom of suction pipe)
47 Purge AdBlue airline with warm water
48
Note:
Items 46 & 47, otherwise, at least once a year
N/A
N/A
N/A
N/A
6C - Recommendations for lubricants:
6C.1 - Choosing the lubricant
according to the Supplier’s Engine Manual:
During the engine’s use, some engine oil used to lubricate the pistons will be burnt (consumed) due to the high temperatures.
This ‘burning’ causes the engine oil to deteriorate and the ‘burnt’ oil contaminates the lubricant. It is therefore important that
the engine oil is replaced after a certain period. Such deterioration depends on the operating conditions as well as the quality
of the oil used. So, the time interval for replacing the oil is dependent upon usage and environment.
6C.2 - Gear lubricant:
Allison Transmissions:
Lubricant used from factory on all Allison product is Transynd – it is recommended this be
used to top up and be replaced with the same product every 120 000km
ZF Transmissions:
Lubricant used for all ZF transmissions from the factory is Dexron 3 which requires replacing
every 30 000km.
NOTE: ALWAYS refer to the transmission Supplier for up to date recommendations on lubricants and service
intervals.
6C.3 - Hydraulic oil for power steering:
Applied standard: The Genera Allison C-3; The DEXRON-II hydraulic transmission oil should be chosen when the power
steering mechanism operates under a temperature lower than 10°C; If above 10°C then choose C-3 / 10W. The C-3/10W
grade oil is all-purpose oil used in a variety of conditions; The C-3 / 30 grade oil is all-purpose oil for above freezing
environments.
Owner’s Manual