BC Biomedical PS-2200 series, Руководство пользователя

Страница: 75 / 85

Cardiac Output
73
Running a Test
1) Select the desired test.
2) Select the injectate temperature (0 °C or 24 °C).
NOTE : This is different than the selection made on the MCO-2100, which sets
the injectate temperature on the DUT. This tells the PS-2200 which
injectate temperature to simulate.
3) Select the desired flow for simulation (Normal Test only).
4) Use the key to start the test.
5) The test will run one complete cycle. Use the key to repeat as often as desired.
The key may be used at any point to terminate the cycle.
Normal
This test allows the selection of a flow rate (2.5, 5.0 or
10.0 l/min). When run, it will produce the normal
temperature curve for the selected injectate temperature
(0 °C or 24 °C). The DUT should interpret this as the
selected flow rate.
Faulty Injectate
This is an abnormal output meant to simulate a condition
where the injectate is not delivered in a smooth flow.
Left-to-Right Shunt
This is an abnormal output meant to simulate a
physiological condition where the blood is shunted
across the heart rather than to the lungs.
Temperature Calibration Pulse
This is a calibration output waveform that drops the
normal 37 °C temperature output to 35.5 °C for 1
second.