BC X-PRO 130 – USER MANUAL
Thank you for purchasing the new professional battery charger and power supply unit
BC X-PRO 130
.
Please read carefully this manual, which provides the operating instructions for the product and indicates
all precautions and warnings to be observed for your safety. Keep the manual with care for future
reference, and follow all instructions before and during use of the device.
FEATURES
BC X-PRO 130 is a professional battery charger and power supply unit with automatic multi-cycle charging
technology. Developed to ensure a stable voltage on 12V vehicles during diagnosis operations and flash
programming, it also allows to recover, recharge and maintain all 12V batteries.
Its compact size and reduced height (10 cm) make it ideal for powering vehicles on display in showrooms,
allowing it to be easily positioned under any car.
The device is supplied with 3 meter long battery connection cables with insulated terminals.
BC X-PRO 130 has 4 different modes/programs to choose from:
• Battery Charger:
for the recovery, charging and maintenance of all starting batteries (traditional, sealed,
gel, AGM/EFB Start&Stop, Calcium-Calcium and lithium). It is possible to select the battery type, the
charging current, the maximum Ah to recharge and the maximum charging time. Range of use:
-
12V batteries from 1 Ah to 1300 Ah (current min-max: 1 Amp - 130 Amp)
BC X-PRO 130 can also be used for the
partial charging of lithium batteries (25%, 50%, 75%, 100%)
: in fact,
lithium batteries must be stored at a charging percentage around 25%, according to the regulations in force
in the European Union (see the manufacturer's instructions in this regard).
• Power Supply / Voltage Stabilization:
this program allows to keep a stable voltage during diagnosis
operations and flash programming on the vehicle, compensating for the energy absorption of the on-board
devices (fan, electronic suspension, electric windows...). It is possible to select the output voltage of the
device in the range from 12.8V to 14.8V as well as the maximum supplied current.
• Memory Saver for Battery Replacement:
selecting the Power Supply mode and the output voltage of
12.8V, it is possible to safeguard the vehicle’s memories during battery replacement.
• Showroom:
the showroom mode allows an automatic restart of the device whenever it is turned back on.
It can be activated in both the following modes:
-
Power Supply:
it allows to power the vehicles on display, compensating for the current absorbed
by the on-board instruments (headlights, on-board computer, electric windows, heating...) that are
normally used or turned on in showrooms for vehicle demonstrations. When the Showroom mode
is active, in the event of a power failure, BC X-PRO 130 restarts automatically when the electricity is
restored, allowing it to be left connected with no need for intervention by showroom personnel.
-
Battery Charger:
when the showroom mode is active, in the event of a power failure, BC X-PRO 130
restarts automatically when the electricity is restored, starting to charge the battery again. The
device also keeps in memory the Ah provided to the battery: when the device is turned back on, it
resumes counting Ah starting from the value reached at the last shutdown.
SAFETY AND WARNINGS
This device has to be used according to the working conditions it has been designed for within the limits
indicated in this manual. Any other use is to be considered either dangerous or improper. Please strictly
comply with all safety instructions. The manufacturer is completely exonerated from whatever
responsibility for possible damages due to either wrong, unreasonable or improper use of the device.
