HOW TO USE THE 5V 2.1A / 1A USB OUTPUT TO RECHARGE SMARTPHONES, TABLETS AND OTHER DEVICES
1.
Turn on BC BOOSTER K10000 PRO sliding the "ON/OFF Switch" to position "ON".
2.
Connect the USB multiple adapter to the USB 2.1A Output or the USB 1A Output of BC BOOSTER K10000 PRO.
3.
Connect the other end of the cable to the device to charge, using the correct adapter. If the right adapter is not available, it is possible to use the
original USB adapter of your device and connect it to the device that has to been charged. Turn on the connected device, if needed.
4.
Press two times the LED Power Indicator Switch to start charging.
5.
At the end of the charging process, turn off the charged device (if needed) and disconnect the cable from the jump starter’s USB port.
6.
Turn off BC BOOSTER K10000 PRO sliding the "ON/OFF Switch" to position "OFF".
7.
If necessary, charge BC BOOSTER K10000 PRO before another use.
HOW TO USE THE 12V 10A OUTPUT & THE OBD ADAPTER FOR MEMORY SAVING (OPTIONAL)
BC BOOSTER K10000 PRO can supply devices equipped with a 12V cigarette lighter adapter.
1.
Make sure that the device that you want to connect to the jump starter is turned off before connecting it.
2.
Turn on BC BOOSTER K10000 PRO.
To make sure that the automatic switch off does not intervene, turn on also the front LED light
.
3.
Insert the 12V adapter of the external device into the 12V 10A Output of BC BOOSTER K10000 PRO. Turn on the connected device, if needed. .
To use the device as memory saver while replacing a car battery, connect the OBD adapter to the 12V output and to the car’s OBD socket.
4.
After the usage, turn off the charged device (if needed) and disconnect the 12V adapter from the 12V Output Socket.
5.
If necessary, charge BC BOOSTER K10000 PRO before another use.
Tip: if the output current exceeds 10A, the fuse would cut off the circuit and protect the battery. The fuse (10A) is replaceable.
HOW TO USE THE FRONT LED LIGHT/EMERGENCY LAMP
Slide the "ON/OFF Switch" to position "ON" and press the Front LED Light Switch for 3 seconds to turn on the Front LED Light.
Press the switch again to activate the available modes in sequence: Fixed light -> Stroboscopic light -> SOS light-> Off.
HOW TO USE THE SIDE LED LIGHT/EMERGENCY LAMP
Slide the "ON/OFF Switch" to position "ON" and press the Side LED Light Switch for 3 seconds to turn on the Side LED Light.
Press the switch again to activate the available modes in sequence: Fixed light -> White/Red Flashing light -> Off.
TECHNICAL DATA
Dimensions
181 * 184 * 89 mm
Weight
1200 grams
Output
5V – 1A + 2.1A / 12V – 10A / Jump Start 12V/24V
Input
12V-24V - 2A
Full Charging Time
7 hours
Cranking Current (CA)
12V / 24V 500A
Peak Current (PA)
12V / 24V 1000A
Operating Temperature
-20°C - +60°C / -4°F - +120°F
Storage Temperature
< 70°C
F.A.Q. – QUESTIONS & ANSWERS
1. How can I turn off BC BOOSTER K10000 PRO?
Slide the "ON/OFF Switch" to position "OFF" to turn off the device.
2. How many times can I charge my smartphone before charging BC BOOSTER K10000 PRO?
It depends on the model and capacity, for example around 14 times with an iPhone. We recommend however not to discharge the device below 3 LEDs.
3. How many times can BC BOOSTER K10000 PRO jump start a vehicle before it needs to be recharged?
On a full charge, the device can jump start a vehicle up to 40 times in a row. It is important to wait at least 30 seconds between an attempt to jump start the
vehicle and the following one, in order not to damage the internal battery.
4. How long does the internal battery of BC BOOSTER K10000 PRO retain the charger?
The device is provided with a lithium battery, that can retain the charge for 3/6 months. However, we recommend to fully charge it at least every 3 months.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
No response when pressing the
switch button
1. Low voltage protection
2. You are using the device to jump start
a vehicle
Charge the product with the Home Adapter or the Car Adapter
provided in the package to reactivate the LED indicator.
The jump starter cannot be fully
charged
The “ON/OFF” Switch is in “OFF” position
Slide the "ON/OFF Switch" to position "ON"
WARNING AND SAFETY
1. Before jump starting the vehicle, please always make sure that the clamps are firmly connected to the jump start socket of BC BOOSTER K10000 PRO
and to the battery terminals. Check if the vehicle battery terminals are rusted or dirty, jump start the vehicle again only after cleaning it. DO NOT try to jump
start again after 3 attempts to avoid any damage, but check if there is any other problem with the vehicle.
2. DO NOT connect the red clamp and the black clamp together, it may cause damages and dangerous situations.
3. DO NOT disassemble or open the device or any other component, it may cause damages and dangerous situations.
Please also observe the following precautions:
1. BC BOOSTER K10000 PRO is not intended for using by children or adults with reduced physical, sensory or mental capabilities, without the presence of a
responsible person who can ensure the safe use of the device. Do not use as a toy.
2.
Non utilizzare BC BOOSTER K10000 PRO in bagno o in un luogo bagnato o dove possa venire in contatto con l’acqua.
3. Do not modify or disassemble the device. Please always check the integrity of cables and device before each use.
4. Do not expose the device to flames or heat sources. Do not operate it in the presence of flammable liquids, gases or dust.
5. Do not throw the device; avoid strong impacts or shocks.
6. Recharge the internal battery of the booster only with an ambient temperature between -20°C and 60°C. Store it at a temperature below 70°C.
7. During charge or storage, if the booster becomes hot or the color of the case changes, please stop immediately using/charging the device. The booster
may swell or emit smoke.
8. Charge the internal battery of the booster only with the Home Adapter or the Car Adapter provided in the package.
9. Please contact your local distributor in case of anomalies or faults while using the device.
10. If the liquid inside BC BOOSTER K10000 PRO gets in contact with your eyes or skin, do not rub them but rinse them abundantly with clean water and
immediately seek medical attention.
11. Do not place BC BOOSTER K10000 PRO on combustible or flammable material, bed or blankets.
12. At the end of its useful life, discard the appliance with due care for our environment.
WARRANTY
The device is covered by a limited warranty for failures or malfunctions due to materials or workmanship for a period of 12 months from the date of purchase.
The warranty is only valid upon presentation of the original receipt (from dealer/retailer) by the original purchaser and it is not transferrable. The warranty
conditions are the following: the warranty is valid only in case of failures during normal operation. Any repairing right under manufacturer's warranty decays in
any of improper use of the device; unduly opening of the device; repairing performed by unauthorized personnel. If you attempt to open the device or in case of
tampering of any of its components, the warranty will become inapplicable. The warranty is void if the label of BC BOOSTER K10000 PRO has been removed.
