7
EN
G
LIS
H
FR
A
N
C
A
IS
SP
A
N
IS
H
D
EUT
SC
H
One channel no sound
- Make sure the balance control is in the correct position.
- Check the speaker connections.
- Check interconnects.
A loud humming or buzzing is noticeable
- Check turntable or tonearm to capture an ground fault or
a faulty connection.
- Make sure that interconnect cable is loose or defective.
- Make sure your tape deck or turntable is not too close to
the amplifier.
The bass is weak or the stereo image is diffuse
Make sure the speakers are not in phase.
The sound is distorted
Make sure that the control settings of volume or tone is not
too high.
The remote control does not work
- Check that the batteries have not expired.
- Make sure nothing is blocking the remote sensor.
In case the above solutions do not remedy your problem,
check our FAQ section (Frequently Asked Questions) on our
website: www.bc-acoustique.com
For repair, during or after the warranty, please contact your
dealer.
To obtain warranty service and technical support, thank you
kindly to register your product online on the website
www.bc-acoustique.com at the product registration
section.
BC ACOUSTIQUE
BP 306
94709 Maisons-Alfort Cedex France
www.bc-acoustique.com
Specifications
Preamplifier section
Line level input RCA (LINE 1 to 4, OPTION)
Sensitivity: 200 mV
Impedance: 50 kOhms
Maximum input level: 7 V
Corrections
Bass (± 10 dB à 100 Hz)
Treble (± 10 dB à 10 kHz)
Amplifier section
Continuous average power into 8Ω : 2x80W
Continuous average power into 4Ω : 2x140W
Distortion: 0,02% (20 Hz - 20 kHz)
Signal/Noise ration: 95 dB (1W)
Connections
4x RCA line stereo input (LINE 1 to 4)
1x OPTIONAL CARD Input (OPTION or LINE 5)
1x Headphone output (jack 6,35 mm) front panel
Speaker terminals screw-compatible banana plugs
General
Detachable power cable
UNIT
Dimensions (W×H×D): 430x125x410 mm / Weight: 11.2 kg
BOX
Dimensions (W×H×D): 515x210x405 mm / Weight: 13.2 kg
Volume: 0.044 m
3
EAN CODES
EX322.1 Black : 0820103857123
EX322.1 Silver : 0820103857130
Here you will find a number of fault description and
possible solutions we invite you to read in order to ensure
the possibility of an actual breakdown of your device.
The unit does not turn on.
- Make sure the power cord is properly connected.
- Make sure the plug is fully inserted into the wall outlet
and there is power.
- Make sure the camera is turned on.
- Check the fuse in the mains plug or adapter if necessary.
There is no sound
- Make sure the unit is not in standby mode.
- Check that the source component is connected properly.
- Make sure your speakers are properly connected.
Troubleshooting
Troubleshooting
