BBV FBM, Руководство по установке

Страница: 11 / 52

11
Connect to matrix WIFI network with computer
(see full guide on page 18)
1. Connect to Network name: BBV_AP
2. Enter Password: BBVCCTV (password can be
changed later. See page 23)
3. Enter IP address in browser (for web page): 192.168.42.1
E
Check System Status on computer web page
1. Check that the FBM is running.
2. Check that the Keyboard, Alarm Cards and all other peripherals have
been detected.
F


Verify / Enter system settings
(see full gui on page 22)
1. Check/change the values in this section to suit your specific setup.
2. Fill-in the 4 highlighted fields, as seen in the diagram below
(e.g. for a system with 1 keypad, 128 cameras, 16
monitors and 1 Alarm Card; ‘Max Keyboards’ is 1, ‘Max Cameras’ is 128, ‘Max Monitors’ is 16, ‘Max Alarms’ is 16).
3. Once you’re happy with your System Settings, click the ‘Save’ button.
4. Once you’ve setup and saved the settings in each section, click the ‘Save and Restart’ menu tab at the top of the
web page. Then allow the FBM to reboot with the new settings.
H

Check and fill-in these fields
If you need to connect/setup Alarm Cards,
please see page 39
G
