BBT BBT-BC-36CCBH Скачать руководство пользователя страница 16

16

WWW.BBTA.COM.AU

BBT-BC-36CCBH, BBT-BC-36CCDH

PREPARING FOR OPERATIONS

Engine Safety Precautions 

Warning Carbon Monoxide Poisoning 

All engines contain carbon monoxide in their exhaust. 
Carbon monoxide is a deadly, colourless, tasteless, 
odourless gas which may be present even if you do 
not smell or see any engine exhaust. Levels of carbon 
monoxide, which can be deadly, can be present for days 
in an enclosed area that has poor ventilation. Any level 
of carbon monoxide, if inhaled, can cause headaches, 
drowsiness, nausea, dizziness, confusion and eventually 
death. If you experience any of these symptoms, seek 
fresh air and medical attention immediately.

Preventing Carbon Monoxide Poisoning 

•  Never run engine indoors. 
•  Carbon monoxide can reach dangerous levels very 

quickly. 

•  Never run engine outdoors where exhaust fumes 

may be pulled into a building. 

•  Never run engine outdoors in a poorly ventilated 

area where the exhaust fumes may be trapped and 
not easily taken away. (Examples include: in a large 
hole or areas where hills surround your working 
area.) 

•  Never run engine in an enclosed or partially 

enclosed area. (Examples include: buildings that 
are enclosed on one or more sides, under tents, 
carports or basements.) 

•  Always run the engine with the exhaust and 

muffler pointed in the direction away from the 
operator. 

•  Never point the exhaust muffler towards anyone. 

People should always remain a safe distance 
away from the operation of the engine and its 
attachments. 

Petrol Fires and Handling Fuel Safely 

Fuel and fuel vapours are highly flammable. Never use 
fuel where a spark or flame may be present. Never use 
fuel where a potential source of ignition could occur. 
(Examples include: hot water systems, clothes dryer or 
electric motors, etc.) 

Keep flames and sparks away from engine and fuel 
to prevent fires. Fuel fires spread very quickly and are 
highly explosive. 

Prevention of Petrol Fires 

•  Never fill your fuel tank with fuel indoors. 

(Examples include: garage, shed, house, porch, 
etc.) 

•  Always fill fuel tank outside in a well ventilated 

area. 

•  Never remove the fuel cap or add fuel with the 

engine running. Stop engine and allow to cool 
before filling. 

•  Never drain fuel from engine in an enclosed area. 

•  Always wipe up excess (spilled) fuel from engine 

before starting. Clean up spilled fuel immediately. 

•  Allow spilled fuel to dry, after wiping and before 

starting. 

•  Allow fuel fumes/vapours to escape from the area 

before starting engine. 

•  Test the fuel cap for proper installation before 

starting and using engine. 

•  Always run the engine with fuel cap properly 

installed on the engine.

•  Replace fuel cap if it allows fuel to spill or leak. 
•  Never smoke while refilling engine fuel tank. 
•  Prevent fire and explosion caused by static electric 

discharge. Use only non-metal, portable approved 
fuel containers.

•  Do not store engine with fuel in fuel tank indoors. 

Fuel and fuel vapours are highly explosive. 

•  When storing, screw down fuel cap vent tightly. 
•  Never pour fuel from engine fuel tank. 
•  Never siphon fuel by mouth to drain fuel tank. 
•  Always have an adult fill the fuel tank. 
•  Never allow an adult or anyone under the influence 

of drugs or alcohol to fill engine. 

•  Never allow children to fill the engine. 

Burns and Fires 

The muffler, muffler guard and other parts of the 
engine become extremely hot during the operation 
of the engine. These parts remain extremely hot even 
after the engine has stopped. 

Prevention of Burns and Fires 

•  Never remove the muffler guard from the engine. 
•  Never touch the muffler guard as it is extremely 

hot and will cause severe burns. 

•  Never touch parts of the engine that become hot 

after operation. 

•  Always keep materials and debris away from 

muffler guard and other hot parts of the engine 
to avoid fires. 

Hot gases are a normal by-product of a functioning 
catalytic converter. Follow all safety instructions 
to prevent burns and fires. 

   CAUTION

Содержание BBT-BC-36CCBH



























Отзывы: