SSS3416TB
Owner’s Manual
11
Step 8 (Assemble the side shelf to the body assembly)
a) Loosen the four pre-installed bolts on the right side of body assembly and allow 1/4 bolt’s length to extend from
body assembly.
b) Align the holes on the right side shelf (C) with the bolts extended from the right side of body assembly. Push down
the right side shelf until it locks into place. Pull out the drawer from the right side shelf. Tighten bolts by hand until
secured.
c) Align the holes on right side shelf with the holes on the control panel and body assembly.
d) Insert one bolt (AA) into each pre-drilled holes. (See diagram to below.) Tighten bolts by hand until secure.
e) Repeat the procedure for the assembly of left side shelf (B) and body assembly.
f) Go back and tighten all bolts using the screwdriver provided.
AA
M6X15 Bolt 4 PCS
