GPF2718JB
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is fully
assembled, go back check and make certain all the bolts are tight. Tighten again with screwdriver provided if necessary.
Estimated Assembly Time: It will take less than 40 minutes to assemble the grill.
A x4
(
)
1
2
3
4
5 2
-
5 1
-
6
G x2
(
)
H x2
(
)
Step 1 (Assemble the cart)
Align the holes on the bottom panel (4) with the
holes on the front panel (1) and the holes on the
left back leg (2) and the right back leg (3).
Screw one M6 bolt (A) into each pre-dilled hole.
Tighten by hand until secure.
Go back to tighten all the bolts using the hexagon
wrench provided.
Step 2
(Install the wheels)
Insert the wheel axle (6) into the hole on
the left back leg and the front panel.
Put one wheel (5-2) on each end of the
axle.
Put one M10 flat washer
（
G
）
on each end
of the axle.
Screw one M10 nut (H) on each end of the
axle toward the wheel and tighten all nuts
using the hexagon wrench provided.
Cover one hub cap (5-1) on each wheel.
