GPF2414C
Owner’s Manual
9
Step 7
Put the body assembly (MM) upon the cart.
Align the holes on body with the holes on left and
right side of cart.
Screw one M6 bolt (A) into each hole. Tighten all
bolts using the screwdriver provided.
Step 6
Align the hole on right side of spare tank stopper (LL) with
the hole on bottom of right frame piece.
Screwing one M6 bolt (A) into the hole.
Repeat the procedure for the left frame piece.
Tighten all bolts using the screwdriver provided.
Step 8
Align the holes on top beam (NN) with the holes
on the back of the cart.
Screw one M6 bolt (A) into the hole. Tighten all
bolts using the screwdriver provided.