background image

 

 

 

 

 

 

1. Precautions and Safety Notices 

 

Prior to using this service manual,please ensure that you have carefully followed all the procedures  outlined in 

the user's manual for this product. 

(1)

  Read all of  these instructions. 

(2)

  Save these instructions. 

(3)

  Follow all warnings and instructions a marked on the product. 

(4)  

Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol cleaners, use 

a damp cloth for cleaning. 

(5)

  Do not use this product near water. 

(6)

  Do not place this product on an unstable cart,stand or tablle.The product may fall,causing serious 

     damage to the product. 

(7) 

 Do not tear up the EMI label, if the label has been destroyed,that must to past same size label on the same 

position. 

(8)

  Slots and openings in the cabinet and the back or bottom are provided for ventilation,to ensure reliable 

operation of the product and to protect it from overheating,those openings must not be blocked or 

covered.The openings should never be blocked by placing the product on a bed,sofa, rug, or other similar 

surface.This product should not be placed in a built-in installation less proper ventilation is provided.  

(9)

  This products should be operated from the type of power source indicated on the marketin label. If you are 

not sure of the type of power available, consult your dealer or local power company

 

(10)

  This product is equipped with a 3-wire grounding type plug,a plug having a third (grounding) pin. This 

plug will only fit into a grounding-type power outlet. This is a safety feature, if you are unable to insert the 

plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of 

the grounding-type plug. 

(11)

 Pay attention to the code which connects with apheliotropism board of inside panel.and don’t hook it. 

(12) 

Do not allow anything to rest on the power cord.Do not locate this product where persons will walk on the 

cord. 

(13)

 If an extension cord is used with this product,make sure that the total of the ampere ratings on the 

product plugged into the extension cord to the waplugged into outlet does not exceed 15 ampere. 

(14) 

Never push objects of any kind into this product through cabinet slots as they may touch dangerous 

voltage points or short out parts that could result in a risk of fire or electric shock.Never spill liquid of any 

kind on the product. 

(15)

 Do not attempt to service this product yourself,as opening or removing covers may expose you to 

dangerous voltage points or other risks.Refer all servicing to service personnel. 

(16)

 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the 

following conditions : 

a.

 

 When the power cord or plug is damaged or frayed. 

b.

 

 If liquid has been spilled into the product. 

c.

 

 If the product has been exposed to rain or water. 

d.

 

 If the product does not operate normally,when the operating instructions are followed.Adjust only those   

controls that are covered by the operating instructions since improper adjustment of other controls may 

result in damage and will often require extension work by a qualified technician to restore the product to 

normal operation. 

e.

 

 If the product has been dropped or the cabinet has been damaged. 

f.

 

 If the product exhibits a distinct change in performance,indicating a need for service. 

 

 

Содержание LT1504S




































Отзывы: