background image

also the system control circuit of the whole player. 

AE45164016 is a piece of 4M*16bit large capacity SDRAM, with the operation voltage of +3.3 V. 
In DV971, the 6ns module is adopted, with high speed and the maximum operation frequency up 
to 166MHz. Its main function is for operation buffer storage of decoding chip MT1389 to store the 
audio and video data stream in decoding. 

29LV160BE is a piece of 16Mbit FLASH ROM, with the operation voltage of +3.3V, mainly for 
storing the user’

s information including OSD character information, operational microcode and 

LOGO in start- up. 

 

 

 

 

 

 

 

 

 

 

II. Audio and Video Output Circuit 

   

1. Video output circuit 

DK1010S can not only output three types of  alternating- line video signal (including CVBS 
composite video, S terminal Y-C signal and Y/Cb/Cr color difference signal), but also output two 
types of  progressive  line video signal (including Y/Pb/Pr  progressive line color difference signal 
and VGA  progressive line signal). 

The decoding chip MT1389 has built- in video encoding circuit for direct output of analogue 
composite video signal CVBS, S terminal, color difference signal and VGA signal.   

The CVBS composite video signal is outputted from the Pin 198 of MT1389, the S terminal signal 
Y-C is outputted from the pins 194 and 196 of MT1389, the color difference signal and the R-B-G 
signal of VGA port is outputted from the pins 203, 202 and 200 of MT1389, the row and field 
synchronization signals of VGA port are outputted from the pins 207 and 205 of MT1389 
respectively.  

To mention specifically, the  alternating- line color difference signal, the  progressive  line color 
difference signal and progressive  line R-B-G signal are outputted from the same pin, therefore the 
signal output shall be selected according to the ports of TV, otherwise there will be only sound but 
without picture display. 

2. Audio output circuit

 

Audio signals processed by MT1389 output 5-track data signals through pin 217, pin 218 and pin 
219 and 5-channel clock signals through pin 214 and pin 215. These signals after passing through 

 

 

 

CLK 

DQML 

DQMH 

CKE 

113 

RAS 
CAS 
CS 

WE 

BA0 

BA1 

15 

39 

38 
37 

18 
17 
19 
16 

20 
21 

137 

156 
157 
140 
139 
142 
138 

145 
143 

DMA0

DMA11 

DQ0

DQ15 

77 

A0

A21 

AD0

AD7 

DCE 

DRD 

DWR 

RY/BY 

BYTE 

AE45164016 

MT1389 

29LV160BE 

26 

28 

11 

15 

47 

79 

66 

VD 

GND 

Figure 

VII

 

Содержание DK1010S
































Отзывы: