SPK.
1
Select speaker mode
TEST
Noise testing
VCD
Headphone
M H Z
LIVE
DISCO
KHZ
CH
HALL
STAGE
STADIUM
STEREO
DIGITAL
OPTICAL
PRESET
SLEEP
MP3
SOUNDFIELD
SL
SR
R
C
L
MUTE
STERO
TUNER
HOMETHEATRERECEIVERAV311T
◆
◆
During system working, it is used for users to
adjust level balance between channels in
multi-channel state.
In non-STEREO decode mode, press TEST
button on the remote control to enter noise
testing mode. The unit will output noise
according to the sequence of left, centre, right,
surround rignt and surround left. The lasting
period of each channel is 2s, during which
time users may press the MAIN VOLUME
button on the remote control to synchronously
adjust 6-channel level, and may also press
MULTI-FUNCTION button to adjust each
cnahhel's level. To exit noise testing mode,
please press TEST button again.
2.3.15 Select Speaker Mode
Note: The selection of "Large" or "Small" is set
by speaker calibrater and bass playing
ability. When subwoofer speaker and
subwoofer output terminal are connected,
you may set "SUB ON", or else, "SUB
OFF". When speaker mode is set in
"SMALL", subwoofer speaker must be set
in "ON".
◆
Press SPEAKER MODE SETUP button on the
remote control, when"SP SMALL"or”SP
LARGE"appears,pressing MULTI-FUNCTION
button again may change the left/right speaker
mode. Press speaker mode button on the
remote control, when "SUB ON" or "SUB OFF"
appears, pressing MULTI-FUNCTION button
again may set whether there is subwoofer
speaker mode.
2.3.16 Headphone
◆
This unit is with individual headphone amplifier.
If necessary,please insert the headphone plug
into the headphone jack on the front panel. In
this state, changing decode mode is invalid.
- 15 -
