© BB Lightpipe EVO Manual 2018
We reserve the right to make adjustments to this document without prior notice.
6. Mounting sequence light lines
1.
plant out the position of mounting brackets (see chapter 4) by means of a laser
2.
drill the holes and mount the brackets
3.
click the BB Lightpipe into the bracket with 2 persons
4.
lock the luminaires into the bracket by means of pop rivets
5.
connect the trough-wiring and infeed cable (1) with the Plug & play connectors (3)
6.
if necessary, adjust the phase selection
7.
place the connectors (3) and sealing disc (2) into the driver housing (4)
8.
make sure the sealing disc properly closes the driver housing
9.
slide the cover (5) over the open gap of the fixture to finish
Picture: connecting a Start Cable (6091)