Bazoongi BZ1509T, Руководство пользователя

Страница: 14 / 19

14
3. Lay the Bed(8) on the ground inside of the assem-
bled frame. Make sure that the two warning decals
(not shown) are on top of the Bed.
Note: There are V-rings around the edge of the
Bed(8) and holes around the top of the frame.
During this step, you will attach the Bed to the
frame using the included Spring(9) for holes of
frame (See the inset drawing).
To attach each spring, you will first hook one end of the
Spring into a V-ring with yellow webbing location (see
the inset drawing).
Hook a Spring (9) into one of the of the V-rings
with yellow webbing location on the Bed(8)
and into one of the top holes in the frame.
Attach a second spring with yellow webbing
location directly across the Bed from the first spring.
Attach two more springs with yellow webbing
location halfway between the first two springs, so
four springs are attached as shown. Attach four
more springs (not shown) halfway between the
first four springs. Continue attaching springs half-
way between the previously attached springs, until
all the springs are attached.
During the installation of springs, wear
gloves and protective eye wear.
3
Frame
Holes
V-rings
8
9
9
9
9
12
Hook a spring to the Bed(8) and using the spring pull-
ing tool(12), pull the spring from the Bed to the hole
slot in the trampoline frame with even spring tension.
Hook the V-ring
V-ring
8
9
Frame
Top
spring