UT6200 / UT8200
UT6200RL / UT8200RL
Contact: www.bazooka.com www.atvpowerrail.com [email protected] 1-800-843-8823 or 225-272-7135
Fig. 1
Push
Pull
Bazooka ATV-TUBE Troubleshooting Guide
Solution:
Press the volume up and the volume down buttons on the ATV-TUBE to see if the beeping
stops
RL Units Only:
Unplug the ATV-TUBE. Remove the battery from the remote for 30 seconds. Reinstall the battery and
plug the ATV-TUBE back in.
How to remove and install the remote battery:
Remove the battery tray from the remote. To remove the battery tray push the small tab in and
then pull out on the tray. (Fig. 1)
Reinstall the battery tray into the remote making sure the battery is facing the correct direction. (Fig. 1)
Symptom:
LED lights fade on and stays on, and the RF remote does not work.
We have found that the charging systems on some ATVs and UTVs produce voltage fluctuation and/
or dirty voltage that interferes with the RF circuit in the ATV-TUBE
Solution:
Contact SAS and we will send you an inline Power Stabilizer Filter that easily plugs into the main
power wire to the ATV-TUBE and usually resolves this problem
.
