Bazooka NOS6, Руководство по установке, Страница: 7 / 12

6
Next, install the wire loom by pushing the loom onto the wire, as
shown in below. Starting from the free end and working your way up
to the nozzle. ( Note: Pulling the wire loom will result in binding,
making it more difficult to put the loom in place. ) Remove the
locking nut from the nozzle by turning counter-clockwise ¼ turn. Once
the wire loom is passed along the length of the wire and through the
locking nut, fold the wire loom over itself at least 5/8 of an inch, so
the end of the loom is flush with the locking nut. Slide the remaining
wire and loom through the locking nut, and screw the locking nut into
place by turning ¼ turn clockwise.
FINISHING THE LOOK (Step 2)
Braided wire loom
Locking
Nut
5/8”
Fold over