Installation Instructions
1
|
P a g e
V 1 . 1 P u b l i s h e d o n . 0 8 . 2 0 1 8
NEVE LED FLUSH MOUNT WITH EMERGENCY LIGHTING
SKU# 189137, 189138
Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Bayside product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this luminaire. Please keep instructions for future reference.
Warranty
•
This luminaire is covered by a 2 year warranty. The warranty is from date of purchase, not the date of installation.
•
If the luminaire is not installed by a licensed electrician it will void the warranty.
•
Please retain proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
•
Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
•
This luminaire is not suitable for use with dimmer switches. Warranty will be void if the luminaire is used on the
same circuit which has a dimmer switch.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation Requirements
•
Must be assembled and installed by a licensed electrician.
•
All wiring and installation of the light fitting must adhere to local and national wiring rules.
eg. AS/NZS 3000:2007/Amendment 2:2012 Electrical installations.
•
This is a CLASS I product and must be earthed.
•
This luminaire is rated IP65, this must be maintained during wiring and installation.
•
Select a suitable location for installation:
-
This luminaire is protected against water penetration to IP65 standards, which is jets of water from any direction.
-
The mounting point must support 2 times the weight of the luminaire.
•
Take care not to pull any electrical wires during unpacking as this may damage the connection.
•
Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
If parts are missing, return the complete product to the place of purchase for inspection or replacement.
•
Check whether the luminaire has been damaged during transport. Do not operate/install any luminaire which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
•
Ensure power to the circuit you are working on has been switched OFF, before commencing any electrical work.
NOTE:
•
Working Temperature: 0
℃～
40
℃
•
SKU#189137 Emergency Classification: C0 D63 / C90 D40;
•
SKU#189138 Emergency Classification: C0 D63 / C90 D50;
•
The luminaire is with over-charge and over-discharge protection.
•
The battery need to be replaced a new one when they no longer meet their rated duration of operation.
•
Please discard or terminate use if unusual smell, over-heating, changes to colour occurs, or there are damages
found on the battery pack.
•
Battery Information: LiFePO4 Battery 6.4V 3000mAh, 2S2P(IFR18650-1500mAh)
