5
Assembly Instructions
1.
Position the table top (A) upside down on a level and protective surface.
2.
Remove the additional metal brackets attached at the side aprons by unscrewing the wood screws. These are
used for shipping purposes only. After removing them, please discard.
3.
Insert four wood dowels (FF) into the small end holes on one side stretcher (D).
4.
Attach the stretcher (D) between one left front leg (B) and one left back leg (C) by threading two Bolts (CC)
with Lock Washers (DD) and Flat Washers (EE) through the cleat hole and screw into legs. Tighten the
bolts with the enclosed hex-key wrench.
5.
Repeat the same procedure to combine the right legs (B and C).
