7
Assembly Instructions
6.
Position the desk at the desired location against a wall and adjust the pre-attached floor levelers at the
bottom of legs (B and C) to level the unit.
NOTE: When adjusting the height and tilting the unit make sure that you ask the help of a friend to prevent
the glass from falling.
7.
Follow the instructions printed on the plastic bag containing the tipping restraint hardware to attach
the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required. Please
contact your local hardware store for assistance. Young children can be seriously injured by tipping
furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping,
causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a
substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to
add the extra security of earthquake restraints, they must be purchased and installed separately.
8.
The integrated power center is pre-attached at the right side of desk top (A) for your convenience. Plug the
power center into a properly grounded outlet.
B/C
E
B
C
