Bayne Thinline BTL 208-12, Руководство по эксплуатации и запасным частям

Страница: 5 / 38

Document Number: 1999-0212 Issue Date: 06/06/07 Revision No: 005 Page: 5 of 38
II. Mounting hand valve(s) on the truck:
1. Choose and mark an acceptable location(s) on the side(s) of the truck to mount the
hand valve assembly(s) (
figure I-2 ).
2.
Remove the mounting bracket(s) from the hand valve assembly(s) and weld to the
truck.
3.
After the weld has cooled, paint the mounting bracket(s) to match the truck color.
4.
After the paint has dried, reassemble the hand valve assembly(s) on the mounting
bracket(s).
Figure I-2
III. Mounting diverter valve on the truck :
1. Choose and mark an acceptable location to mount the diverter valve assembly. This
location should be near the truck’s main hydraulic pressure and tank lines on the
same area of the truck where the lifter is mounted.
2.
Weld diverter valve mounting bracket to the truck.
3.
After the weld has cooled, paint the mounting bracket to match the truck color.
4.
After the paint has dried, bolt the diverter valve to the mounting bracket using the
1/4” bolts, washers, and elastic lock nuts.